文摘
|
耦合现象普遍存在于多维力传感器中,多维力传感器输出如不经过解耦,数据直接应用到机器人操作中,会导致机器人的误操作。针对存在的耦合现象,本文首先分析了多维力存在的耦合原因,根据产生原因将耦合分为两种形式:结构耦合和误差耦合,然后提出了一种新的解耦方法-基于线性神经网络解耦方法,与传统解耦方法相比,该方法大大提高了解耦合精度。最后通过实验验证了该方法的有效性和优越性 |
其他语种文摘
|
Coupling is a common phenomenon in the multi-axis force sensor.If we measure the data without decoupling,it will cause incorrect operation of the robots.Aiming at coupling phenomenon,this paper analyzes the reasons why coupling exists in the multi-axis force sensor.Dividing from the causes there are two types of multi-axis force sensors,structure coupling and error coupling.We put forward a linear decoupling method based on neural network. Comparing to the traditional decoupling method,this method improves the precision of decoupling greatly.In the end of this paper,compared with the traditional decoupling method from expertments,this method was proved its effectiveness. |
来源
|
传感技术学报
,2011,24(8):1136-1140 【核心库】
|
DOI
|
10.3969/j.issn.1004-1699.2011.08.011
|
关键词
|
多维力传感器
;
解耦
;
神经网络
;
结构耦合
;
误差耦合
|
地址
|
1.
中国科学院合肥智能机械研究所, 合肥, 230031
2.
中国科学技术大学, 合肥, 230026
|
语种
|
中文 |
文献类型
|
研究性论文 |
ISSN
|
1004-1699 |
学科
|
自动化技术、计算机技术 |
基金
|
国家自然科学基金重大项目
|
文献收藏号
|
CSCD:4308871
|