特定强度分布脉冲激光表面强化实验
Surface hardening of steel by pulse laser with proportional intensity distribution spots
查看参考文献10篇
|
文摘
|
激光硬化层均匀性受光束空间强度分布和作用时间的影响.采用二元光学变换技术得到光束中心线强度比值为1:2:3,3:2:1和1:1:1的5×5点阵光斑,研究这三种强度分布光斑对Q235钢脉冲激光硬化后表面形貌,硬化层形状,硬度及耐磨性的影响.结果表明,激光光斑的空间强度分布对Q235钢硬化层均匀性影响很大,1:2:3强度分布光斑作用下的材料表面形貌,硬化层均匀性,硬度均匀度均优于1:1:1强度分布光斑 |
|
其他语种文摘
|
The uniformity of hardened layer is affected by dimensional intensity distribution and time of laser spots. Pulsed laser spots with 5 × 5 two dimensional array which have intensity proportions of 1:2:3,3:2:1 and 1:1:1 intensity distribution by optical transformation was used to harden Q235 steel. The effects of laser treatment on surface morphology, hardened layer shape, distribution of hardness and wear resistance of the Q235 steel were studied. The results show that the dimensional intensity distribution of laser spot affects uniformity of hardened layer to a large extent. The surface morphology, uniformity of hardened layer, uniformity of hardness and wear resistance of Q235 steel laser-treated by the array with intensity proportion of 1:2:3 are all better than that by the array with intensity proportion of 1:1:1 |
|
来源
|
材料热处理学报
,2011,32(2):106-111 【核心库】
|
|
关键词
|
脉冲激光
;
光束变换
;
激光强化
;
硬化层均匀性
|
|
地址
|
1.
中国科学院力学研究所, 中国科学院先进制造工艺力学重点实验室, 北京, 100190
2.
中国电子科技集团第十四研究所, 南京, 210039
|
|
语种
|
中文 |
|
文献类型
|
研究性论文 |
|
ISSN
|
1009-6264 |
|
学科
|
金属学与金属工艺 |
|
基金
|
国家自然科学基金重点资助项目
|
|
文献收藏号
|
CSCD:4136989
|
参考文献 共
10
共1页
|
|
1.
Sandven O.
Laser Surface Transformation Hardening, Metals Handbook(9th ed),1981
|
CSCD被引
1
次
|
|
|
|
|
2.
李俊昌.
激光热处理优化控制研究,1995:12
|
CSCD被引
12
次
|
|
|
|
|
3.
Reed R C. Laser transformation hardening of steel:effects of beam mode, beam size, and composition.
Materials Science and Technology,1999,15(1):109-118
|
CSCD被引
8
次
|
|
|
|
|
4.
Leung M K H. Theoretical and experimental studies on laser transformation hardening of steel by customized beam.
International Journal of Heat and Mass Transfer,2007,50:4600-4606
|
CSCD被引
4
次
|
|
|
|
|
5.
何芳. 曲边矩形光斑激光淬火的理论研究.
天津工业大学学报,2003,22(5):17-20
|
CSCD被引
8
次
|
|
|
|
|
6.
王云山. 激光热处理光束优化系统.
中国激光,2008,35(11):1730-1734
|
CSCD被引
6
次
|
|
|
|
|
7.
崔春阳. 球墨铸铁变换激光束淬火性能的研究.
金属热处理,2006,31(10):31-33
|
CSCD被引
5
次
|
|
|
|
|
8.
Li Shaoxia. High-power laser beam shaping by inseparable two-dimensional binary-phase gratings for surface modification of stamping dies.
Optics and Lasers in Engineering,2008,46:508-513
|
CSCD被引
3
次
|
|
|
|
|
9.
Chen Y. Laser surface modified ductile iron by pulsed Nd-YAG laser beam with two-dimensional array distribution.
Applied Surface Science,2005,245:316-321
|
CSCD被引
6
次
|
|
|
|
|
10.
Li Shaoxia. Quasi-dammann grating with proportional intensity array spots.
Optics Letters,2008,33(18):2023-2025
|
CSCD被引
2
次
|
|
|
|
|
了解气象卫星更多信息，请访问