基于球形压入法提取材料的塑性力学参数
A NEW SPHERICAL INDENTATION-BASED METHOD TO EXTRACT PLASTIC MATERIAL PARAMETERS
查看参考文献26篇
|
文摘
|
基于球形压入的工作方式,重点研究材料塑性力学参数的表征方法.首先,通过对球压入可测量的综合评价,选取能晕比(可释放功和压入总功之比)作为主要分析参数;其次,利用孔洞模型、量纲分析和数值模拟等工具,定义特定的代表性应变,建立起能量比和材料塑性力学参数之间的关系式,由此,提出一种能提取材料屈服应力和硬化指数的力学表征方法,该方法避免了对接触半径的测量,确保了方法的可操作性,并通过参数重组提高其稳定性;最后,选用45号钢和6061铝合金进行压入试验,与拉伸试验结果比对显示:该方法识别的塑性力学参数能满足工程测试需要. |
|
其他语种文摘
|
This paper presents a new spherical indentation-based method to extract plastic properties of materials.With the specific evaluation on the response parameters in indentation tests,the energy ratio (the ratio of releasable work to total work) was chose and investigated in order to avoid the estimation of contact radius.Based on expanding cavity models,finite element computations and dimensional analysis, the relationships between energy ratio and plastic parameters are established.With these relationships,the plastic properties of materials can be consequently solved from instrumented spherical indentation test data. Furthermore,the stability of the method has been improved by reorganization of parameters.Finally,the veracity and simplicity of this method is checked by using two typical materials(Steel 45C and Al 6061),which have known true stress-true strain curves. |
|
来源
|
力学学报
,2009,41(5):730-738 【核心库】
|
|
关键词
|
仪器化压入
;
球形压头
;
屈服应力
;
应变硬化指数
;
孔洞模型
|
|
地址
|
中国科学院力学研究所, 非线性力学国家重点实验室, 北京, 100190
|
|
语种
|
中文 |
|
文献类型
|
研究性论文 |
|
ISSN
|
0459-1879 |
|
学科
|
力学;金属学与金属工艺 |
|
基金
|
国家自然科学基金
|
|
文献收藏号
|
CSCD:3669642
|
参考文献 共
26
共2页
|
|
1.
张泰华.
微/纳米力学测试技术及其应用,2004:1-6
|
CSCD被引
2
次
|
|
|
|
|
2.
Cheng YT. Can stress-strain relationships be obtained from indentation curves using conical and pyramidal indenters.
Journal of Materials Research,1999,14(9):3493-3496
|
CSCD被引
18
次
|
|
|
|
|
3.
Cheng YT. Scaling,dimensional analysis and indentation measurements.
Material Science and Engineering,2004,44:91-149
|
CSCD被引
8
次
|
|
|
|
|
4.
Chen X. On the uniqueness of measuring elasto-plastic properties from indentation:The indistinguishable mystical materials.
Journal of the Mechanics and Physics of Solids,2007,55(8):1618-1660
|
CSCD被引
18
次
|
|
|
|
|
5.
Dao M. Computational modeling of the forward and reverse problems in instrumented sharp indentation.
Acts Materialia,2001,49:3899-3918
|
CSCD被引
136
次
|
|
|
|
|
6.
Chollacoop N. Depth-sensing instrumented indentation with dual sharp indenters.
Acts Materialia,2003,51:3713-3729
|
CSCD被引
25
次
|
|
|
|
|
7.
Cao YP. A energy-based method to extract plastic properties of metal materials from conical indentation tests.
Journal of Materials Research,2005,20(5):1194-1206
|
CSCD被引
15
次
|
|
|
|
|
8.
Ogasawara N. Representative strain of indentation analysis.
Journal of Materials Research,2005,20(8):2225-2234
|
CSCD被引
13
次
|
|
|
|
|
9.
Bucaille JL. Determination of plastic properties of metals by instrumented indentation using different sharp indenters.
Acts Materialia,2003,51:1663-1678
|
CSCD被引
35
次
|
|
|
|
|
10.
Swaddiwudhipong S. Material characterization based on dual indenters.
International Journal of Solids and Structures,2005,42:69-83
|
CSCD被引
5
次
|
|
|
|
|
11.
Tabor D.
Hardness of Metals,1951:73-76
|
CSCD被引
1
次
|
|
|
|
|
12.
Kucharski S. Identification of plastic hardening parameters of metals from spherical indentation tests.
Material Science and Engineering A,2001,318:65-76
|
CSCD被引
5
次
|
|
|
|
|
13.
Taljat B. New analytical procedure to determine stress-strain curve from spherical indentation data.
International Journal of Solids and Structures,1998,35(33):4411-4426
|
CSCD被引
9
次
|
|
|
|
|
14.
Nayebi A. New procedure to determine steel mechanical parameters from the spherical indentation technique.
Mechanics of Materials,2002,34:243-254
|
CSCD被引
8
次
|
|
|
|
|
15.
Kim JY. Determination of tensile properties by instrumented indentation technique:Representative stress and strain approach.
Surface and Coatings Technology,2006,201:4278-4283
|
CSCD被引
4
次
|
|
|
|
|
16.
Murty KL. Nondestructive determination of tensile properties and fracture toughness of cold worked A36 steel.
International Journal of Pressure Vessels and Piping,1998,75(11):831-840
|
CSCD被引
2
次
|
|
|
|
|
17.
Alcala J. Continuous measurements of load-penetration curves with spherical microindenters and the estimation of mechanical properties.
Journal of Materials Research,1998,13(5):1390-1400
|
CSCD被引
7
次
|
|
|
|
|
18.
Field JS. Determining the mechanical properties of small volumes of material from submicron spherical indentations.
Journal of Materials Research,1995,10(1):101-112
|
CSCD被引
8
次
|
|
|
|
|
19.
Yu WF. An elastic-plastic indentation model and its solutions.
Journal of Materials Research,1996,11(9):2358-2367
|
CSCD被引
1
次
|
|
|
|
|
20.
Ni W. An energy-based method for analyzing instrumented spherical indentation experiments.
Journal of Materials Research,2004,19(1):149-157
|
CSCD被引
11
次
|
|
|
|
|
了解气象卫星更多信息，请访问