再结晶对Ni_(47)Ti_(44)Nb_9形状记忆合金棒相变和织构的影响
Influence of Recrystallization on Phase Transformation and Texture of Ni_(47)Ti_(44)Nb_9 Shape Memory Alloy Bar
查看参考文献16篇
文摘
|
利用光学显微镜(OM),DSC和XRD,研究了直径19 mm Ni_(47)Ti_(44)Nb_9热轧棒材再结晶对相变和织构的影响,为该合金棒的实际应用提供理论依据。结果表明:热轧棒从450℃开始发生明显再结晶;从850℃/90 min真空退火棒材的中心到边缘,再结晶晶粒尺寸减小,Ms降低,马氏体转变区间变窄,热滞增大;热轧棒中形成了较强的γ丝织构,600℃/90 min退火后,γ丝织构强度稍有下降,退火温度升到850℃,丝织构明显减弱,等密度线发生漫散,形成了新的织构组分,这有利于改善棒材径向方向的恢复应变。 |
其他语种文摘
|
The influences of recrystallization on phase transformation and texture of as-hot-rolled Ni_(47)Ti_(44)Nb_9 alloy bar with a diameter of 19 mm were systematically investigated using optical microscope (OM), differential scanning calorimetry (DSC) and X-ray diffraction (XRD) to provide theoretical basis for application of the alloy bar. The results showed that the recrystallization of the hot-rolled bar started obviously at 450 ℃, and recrystallized grain size was decreased and M, dropped. Temperature ranges of martensitic transforma-tion became narrower and thermal hystereses increased from the center to the edge of the bar vacuum annealed at 850 ℃/90 min F.C. More intensive 7 fibre texture was formed in the as-hot-rolled bar. But intensity of 7 fibre texture in the bar annealed at 600 ℃/90 min F.C was slightly decreased. When annealing temperature was 850 ℃, 7 fibre texture was markedly weakened, the diffusion of the isopycnals occurred, and new texture components were formed, which was beneficial to improving restoration strain of the bar along radial direction. |
来源
|
稀有金属
,2008,32(4):404-408 【核心库】
|
关键词
|
形状记忆合金
;
再结晶
;
织构
;
相变
;
Ni_(47)Ti_(44)Nb_9棒
|
地址
|
1.
东北大学材料物理与化学研究所, 辽宁, 沈阳, 110004
2.
中国科学院金属研究所, 辽宁, 沈阳, 110016
|
语种
|
中文 |
文献类型
|
研究性论文 |
ISSN
|
0258-7076 |
学科
|
金属学与金属工艺 |
基金
|
中国核动力研究设计院核燃料及材料国家重点实验室基金
|
文献收藏号
|
CSCD:3386661
|
参考文献 共
16
共1页
|
1.
Jin W. Thermodynamic analysis on relation between transformation temperature andσM in a Ti44Ni47Nb9 shape memory alloy.
J Mater Sci &Technol,2002,18(6):538
|
CSCD被引
3
次
|
|
|
|
2.
Piao M. Characteristic of deformation and transformation in Ti45Ni47Nb9 shape memory alloy.
Mater Trans JIM,1992,33(4):346
|
CSCD被引
56
次
|
|
|
|
3.
Thamburaja P. Polycrystalline shape-memory materials:effect of crystallographic texture.
Journal of the Mechanics and Physics of Solids,2001,49:709
|
CSCD被引
17
次
|
|
|
|
4.
Yamauchi K. Specimen preparation for transmission electron microscopy of twins in B19/martensite of Ti-Ni shape memory alloys.
Materials Transactions,1996,37(3):210
|
CSCD被引
1
次
|
|
|
|
5.
Inoue H. Texture and shape memory strain in TiNi alloy sheets.
Acta Mater,1996,44(2):4825
|
CSCD被引
11
次
|
|
|
|
6.
Liu Y. Effect of texture orientation on the martensite deformation of NiTi shape memory alloy sheet.
Acta Mater,1999,47(2):645
|
CSCD被引
18
次
|
|
|
|
7.
Miyazaki S. Texture of Ti-Ni rolled thin plates and sputter-deposited thin films.
International Journal of Plasticity,2000,16:10-11
|
CSCD被引
1
次
|
|
|
|
8.
Li H. Transformational superelasticity in sputtered titanium-Nickel thin films.
Scripta Metal,1995,33(6):989
|
CSCD被引
1
次
|
|
|
|
9.
杨冠军. 再结晶退火对Ni47Ti44Nb9合金冷轧板相组成及板材织构的影响.
稀有金属材料与工程,1994,23(3):13
|
CSCD被引
8
次
|
|
|
|
10.
李超.
金属学原理,1988:260
|
CSCD被引
2
次
|
|
|
|
11.
Ray R K. Cold-rolling and annealing textures in low carbon and extra low carbon steels.
Inter Mater Rev,1994,39(4):129
|
CSCD被引
83
次
|
|
|
|
12.
Zhao H. Experimental study of deep drawability of hot rolled IF steel.
Journal of Materials Processing Technology,2002,128(1/3):73
|
CSCD被引
22
次
|
|
|
|
13.
Li D Y. The texture of Ti-51 5at%Ni rolling plate and its effect on the all-round shape memory effect.
Acta Metal Mater,1990,38(1):19
|
CSCD被引
4
次
|
|
|
|
14.
Mulder J H. Anisotropy of the shape memory effect in tension of cold-rolled 50 8Ti49 2Ni(at %)sheet.
Z Metallkd,1993,84(7):501
|
CSCD被引
5
次
|
|
|
|
15.
Li Z H. Effects of ECAE process on microstructure and transformation behavior of TiNi shape memory alloy.
Materials and Design,2006,27:324
|
CSCD被引
11
次
|
|
|
|
16.
Piao M. Effects of Nb addition on the microstructure of Ti-Ni alloys.
Mater Trans JIM,1992,33(4):337
|
CSCD被引
56
次
|
|
|
|
|