板坯连铸结晶器电磁制动和吹氩过程的多相流动现象
MULTIPHASE FLOW PHENOMENA IN A SLAB CONTINUOUS CASTING MOLD WITH ELECTROMAGNETIC BRAKE AND ARGON GAS INJECTION
查看参考文献18篇
|
文摘
|
利用数值模拟方法研究了高拉速连铸结晶器内电磁制动和吹氩耦合作用下的磁场、钢液流场和夹杂物行为，分析了电磁制动和吹氩量等不同工艺参数对结晶器内的钢液流动和夹杂物去除的影响规律．结果表明：电磁制动可明显减缓钢液流速（尤其是弯月面附近速度），但不利于小粒径夹杂物的上浮，5—50μm的夹杂物上浮率由无电磁制动且不吹氩时的6．7％降低到3．3％；吹氩可增加整个上回流区钢液的向上运动趋势，粒径50μm以下的夹杂物颗粒上浮率提高到8．9％；吹氩量增加使自由液面附近产生较强的漩流区，且容易产生二次涡流，直接影响液面波动情况和卷渣的发生；电磁制动和吹氩双重作用则有利于夹杂物上浮，5—50μm小粒径夹杂物去除率可达12．2％，其被凝固坯壳的捕获率可降低到64．4％． |
|
其他语种文摘
|
A numerical simulation study for the multiphase phenomena of magnetic field, liquid steel flow field and inclusion behavior was described, in which the coupled effects of electromagnetic brake （EMBr） and argon gas injection in the slab continuous casting mold with high casting speed were considered. The effects of the EMBr and argon gas flow rate on the liquid steel flow and inclusion removal rate have been investigated. The results show that EMBr could slow down the flow velocity of liquid steel effectively, especially near the meniscus surface, but it had no helpful for the removal of small inclusions and the removal rate for the inclusion particles in diameter range of 5-50 μm reduced from 6.7% without EMBr and argon gas injection to 3.3% with EMBr in the mold. The argon gas injection could increase the liquid steel flow up tendency of the upper circulating area and the floating up rate of inclusion particles with the size 5-50 μm increased to 8.9%. The increase of argon gas flow rate resulted in a stronger eddy zone near the free surface especially near the submerged entry nozzle （SEN） and formed the secondary vortex flow easily, which impacted the fluctuation of free surface and the slag entrapment. The double action of EMBr and argon gas injection could increase the floating up rate of inclusions and the removal rate of small inclusions with the size 5-50 μm increased to 12.2% and the rate for inclusions to be trapped into solidified shell was reduced to 64.4%. |
|
来源
|
金属学报
,2008,44(5):619-625 【核心库】
|
|
关键词
|
高拉速连铸
;
多相流动
;
电磁制动
;
数值模拟
|
|
地址
|
东北大学材料与冶金学院, 辽宁, 沈阳, 110004
|
|
语种
|
中文 |
|
文献类型
|
研究性论文 |
|
ISSN
|
0412-1961 |
|
学科
|
冶金工业 |
|
基金
|
国家自然科学基金
;
国家教育部新世纪优秀人才支持计划
;
宝钢集团公司"钢铁联合研究基金"项目50674020
|
|
文献收藏号
|
CSCD:3295317
|
参考文献 共
18
共1页
|
|
1.
Thomas B G.
80th Steelmaking Conference,1997:375
|
CSCD被引
1
次
|
|
|
|
|
2.
Thomas B G.
76th Steelmaking Conference,1993:273
|
CSCD被引
1
次
|
|
|
|
|
3.
Sussman R C.
10th Process Technology Conference Proceedings,1992:291
|
CSCD被引
1
次
|
|
|
|
|
4.
Noriko K.
ISIJ Int,2002,42:1251
|
CSCD被引
14
次
|
|
|
|
|
5.
Li B K.
Metall Mater Trans,2000,31:1491
|
CSCD被引
2
次
|
|
|
|
|
6.
Li B K.
ISIJ Int,2003,43:923
|
CSCD被引
7
次
|
|
|
|
|
7.
李宝宽. 薄板坯连铸结晶器内钢液流场电磁制动的模拟研究.
金属学报,1997,33:1207
|
CSCD被引
19
次
|
|
|
|
|
8.
雷洪. 连铸结晶器内电磁制动过程的数值模拟.
钢铁研究学报,2002,14(3):13
|
CSCD被引
5
次
|
|
|
|
|
9.
雷洪. 板坯结晶器内电磁制动过程流场的数值模拟.
化工冶金,1999,20:193
|
CSCD被引
6
次
|
|
|
|
|
10.
刘光穆.
钢铁,2007,42(7):23
|
CSCD被引
1
次
|
|
|
|
|
11.
魏军. CSP结晶器EMBr的冶金效果和流场理论分析.
钢铁,2007,42(8):32
|
CSCD被引
2
次
|
|
|
|
|
12.
陈芝会. 静磁场对吹氩结晶器内弯月面行为的影响.
金属学报,2007,43:422
|
CSCD被引
5
次
|
|
|
|
|
13.
张桂芳. 结晶器电磁制动钢液流场数值模拟.
铸造,2005,54:484
|
CSCD被引
1
次
|
|
|
|
|
14.
Fluent Inc.
Fluent 6. 3 Magnetohydrodynamics(MHD)Module Manual, Chapter 1,2006:1
|
CSCD被引
1
次
|
|
|
|
|
15.
Man Y H.
J Mater Process Technol,2003,133:322
|
CSCD被引
4
次
|
|
|
|
|
16.
Fluent Inc.
Fluent 6. 3 User's Guide, Chapter 22,2006:1
|
CSCD被引
1
次
|
|
|
|
|
17.
Pfeiler C.
Mater Sci Eng,2005,413:115
|
CSCD被引
1
次
|
|
|
|
|
18.
Zhang L F.
Metall Mater Trans,2007,38:63
|
CSCD被引
2
次
|
|
|
|
|
了解气象卫星更多信息，请访问