|
PEEK—HA—CF复合材料的力学性能和体外生物活性
Mechanical properties and in vitro bioactivity of carbon fibre-reinforced polyetheretherketone-hydroxyapatite (PEEK-HA) composites for biomedical applications
查看参考文献12篇
文摘
|
制备PEEK—HA—CF复合材料,研究了引入CF对其力学性能和体外生物活性的影响.结果表明,CF的引入显著提高了PEEK-HA—CF的强度和模量,且其强度和模量在一定范围内具有更大的可设计性,能够在较宽的范围内满足与人体承力骨力学性能的良好匹配;PEEK—HA—CF复合材料具有良好的生物活性. |
其他语种文摘
|
The mechanical properties and in vitro bioactivity of PEEK-HA and PEEK-HA-CF composites were comparatively studied, and the effects of the inclusion of CF on the mechanical properties and in vitro bioactivity of PEEK-HA composite were investigated. It is revealed that the mechanical properties of PEEK-HA-CF composite are mainly dominated by the loading of CF. The strength and modulus of the PEEK-HA-CF composite are improved significantly with the inclusion of CF. In addition, the PEEK-HA-CF composite can be designed by adjusting the loading of HA and CF to present the strength and the modulus varying in a certain range, which makes the PEEK-HA-CF composite well matched with the load-bearing human bone in the mechanical properties for a wide range. It is also revealed that PEEK-HA-CF is with good in vitro bioactivity. |
来源
|
材料研究学报
,2008,22(1):18-25 【核心库】
|
关键词
|
复合材料
;
PEEK—HA
;
PEEK—HA—CF
;
力学性能
;
体外生物活性
|
地址
|
中国科学院金属研究所, 辽宁, 沈阳, 110016
|
语种
|
中文 |
文献类型
|
研究性论文 |
ISSN
|
1005-3093 |
学科
|
一般工业技术 |
基金
|
中国科学院知识创新工程重要方向项目
|
文献收藏号
|
CSCD:3218156
|
参考文献 共
12
共1页
|
1.
K Fujihara. Feasibility of knitted carbon/PEEK composites for orthopedic bone plates.
Biomaterials,2004,25:3877
|
CSCD被引
11
次
|
|
|
|
2.
K Fujihara. Zheng-Ming huang Stiffness and strength design of bone plates.
Composites Science and Technology,2005,65:73
|
CSCD被引
1
次
|
|
|
|
3.
L Di Silvo. Osteoblast behaviour on HA/PE composites surfaces with different HA volumes.
Biomaterials,2002,23:101
|
CSCD被引
1
次
|
|
|
|
4.
M J Dalby. Increasing hydroxyapatite incorporation into poly(methylmethacrylate)cement increases osteoblast adhesion and response.
Biomaterials,2002,23:569
|
CSCD被引
9
次
|
|
|
|
5.
M S Abu Bakar. Tensile properties tension-tension fatigue and biological response of polyetheretherketone-hydroxyapatite composites for load-bearing orthopedic implants.
Biomateriais,2003,24:2245
|
CSCD被引
2
次
|
|
|
|
6.
M S Abu Bakar. Mechanical properties of injection molded hydroxyapatitepolyetheretherketone biocomposites.
Composites Science and Technology,2003,63:421
|
CSCD被引
9
次
|
|
|
|
7.
N Sato. Mechanism of fracture of short glass fiber-reinforced polyamide thermoplastic.
Journal of Materials Science,1984,19:1145
|
CSCD被引
3
次
|
|
|
|
8.
S C Yu. In vitro apatite formation and its growth kinetics on hydroxyapatite/polyetheretherketone biocomposites.
Biomaterials,2005,26:2343
|
CSCD被引
3
次
|
|
|
|
9.
T Kasuga. Bioactive ceramics prepared by sintering and crystallization of calcium phosphate invert glasses.
Biomaterials,1999,20:1415
|
CSCD被引
5
次
|
|
|
|
10.
T Kokubo. How useful is SBF in predicting in vivo bone bioactivity.
Biomaterials,2006,27:2907
|
CSCD被引
361
次
|
|
|
|
11.
W Bonfield. Composites for bone replacement.
Journal of Biomedical Engineering,1988,10:552
|
CSCD被引
1
次
|
|
|
|
12.
杨志明. 从临床观点探讨人工骨材料研究.
材料导报,2000,14(3):6
|
CSCD被引
11
次
|
|
|
|
|
|