不同钢种连铸板坯轻压下率的规律分析
ANALYSIS ON THE RULE OF SOFT REDUCTION GRADIENT FOR CONTINUOUS CASTING SLAB OF DIFFERENT STEEL GRADES
查看参考文献13篇
|
文摘
|
结合压下率理论模型，考察了4个钢种连铸板坯轻压下率的变化规律．结果表明：低碳钢、低碳-包晶钢、包晶钢和中碳钢4个连铸钢种的压下率和压下速率的范围变化不大，分别为0．26-0．16mm／m和0．37—0．22mm／min；平均压下率和压下速率随钢种的变化也比较小，分别为0．21mm／m和0．29mm／min；钢种对压下量影响大，所需的压下量随两相区温度范围的变宽而增加． |
|
其他语种文摘
|
Based on the theoretical model of soft reduction gradient, the soft reduction gradients for continuous casting slabs with different steel grades were investigated. The results show that there are no big changes of the range of soft reduction gradient and soft reduction rate for casting steel grades, such as low carbon, low carbon peritectic, peritectic and medium carbon, which changed from 0.26 to 0.16 mm/m and 0.37 to 0.22 mm/min, respectively. The average soft reduction gradient and average soft reduction rate almost have no change as the steel grade changed, which keep 0.21 mm/m and 0.29 mm/min, respectively. It also can be concluded that the soft reduction amount was influenced by steel grade greatly, and it became larger with the increase of the range between liquidus temperature and solidus temperature. |
|
来源
|
金属学报
,2007,43(12):1297-1300 【核心库】
|
|
关键词
|
连铸板坯
;
轻压下
;
压下率
;
压下速率
|
|
地址
|
东北大学材料与冶金学院, 沈阳, 110004
|
|
语种
|
中文 |
|
文献类型
|
研究性论文 |
|
ISSN
|
0412-1961 |
|
学科
|
金属学与金属工艺 |
|
基金
|
国家经贸委技术创新计划重点项目
;
国家教育部新世纪优秀人才支持计划
|
|
文献收藏号
|
CSCD:3045946
|
参考文献 共
13
共1页
|
|
1.
Sivesson P.
Ironmaking Steelmaking,1998,25:239
|
CSCD被引
10
次
|
|
|
|
|
2.
Raja V R.
Steel Times Int,2005,29:41
|
CSCD被引
4
次
|
|
|
|
|
3.
Scholes A.
Ironmaking Steelmaking,2005,32:101
|
CSCD被引
14
次
|
|
|
|
|
4.
Flemings M C.
ISIJ Int,2000,40:833
|
CSCD被引
65
次
|
|
|
|
|
5.
Yim C H.
ISIJ Int,1996,36:231
|
CSCD被引
9
次
|
|
|
|
|
6.
Morwald K.
Steel Times Int,2003,12:17
|
CSCD被引
3
次
|
|
|
|
|
7.
Morsut L.
MPT Int,2003,26(2):44
|
CSCD被引
3
次
|
|
|
|
|
8.
Hodl H.
MPT Int,2003,26(3):74
|
CSCD被引
1
次
|
|
|
|
|
9.
Shigeaki O.
ISIJ Int,1991,31:1400
|
CSCD被引
7
次
|
|
|
|
|
10.
Hubert P.
ISIJ Int,2006,46:1845
|
CSCD被引
6
次
|
|
|
|
|
11.
Ralph N.
Steel Res,2003,74:700
|
CSCD被引
6
次
|
|
|
|
|
12.
Yamanaka A.
Ironmaking Steelmaking,1999,26:64
|
CSCD被引
6
次
|
|
|
|
|
13.
林启勇. 连铸板坯轻压下过程压下率理论模型及其分析.
金属学报,2007,43:847
|
CSCD被引
10
次
|
|
|
|
|
了解气象卫星更多信息，请访问