帮助 关于我们

返回检索结果

Corrosion behavior of an Al-6Mg-Sc-Zr alloy

查看参考文献9篇

文摘 The corrosion behavior of an Al-6Mg-Sc-Zr alloy was studied and compared with that of an Al-6Mg-Zr alloy.The addition of scandium into the Al-6Mg-Zr alloy reduced the susceptibility to exfoliation corrosion. By using the constant load tensile method in a 3.5 wt.% NaCl solution, the resistance to SCC of the Al-6Mg-Sc-Zr alloy was higher than that of the Al-6Mg-Zr alloy. When the specimens were not applied with an anodic current, the Al-6Mg-Sc-Zr alloy was resistance to SCC and no brittle cracking was found on the fracture surface. When an anodic current was applied, the Al-6Mg-Sc-Zr alloy specimens failed as a result of accelerated corrosion rather than SCC. It was believed that the addition of scandium resulted in (Al3Sc, Zr) particles that greatly refmed grains and promoted the formation of homogeneous discontinuous distribution of β-phase in the alloy base, which much contributed to good corrosion resistance of the Al-6Mg-Sc-Zr alloy.
来源 Rare Metals ,2005,24(3):246-251 【核心库】
关键词 corrosion ; Al-Mg-Sc-Zr alloy ; SCC test ; exfoliation corrosion ; scandium
地址

School of Materials Science and Engineering, Beijing University of Aeronautics and Astronautics, Beijing, 100083

语种 英文
文献类型 研究性论文
ISSN 1001-0521
学科 金属学与金属工艺
文献收藏号 CSCD:2021057

参考文献 共 9 共1页

1.  Popovic M. Stress corrosion cracking susceptibility of Al-Mg alloy sheet with nigh Mg content. Process. Technol,2002,125/126:275 CSCD被引 1    
2.  Tanguy D. Hydrogen effects during IGSCC of pure Al-5Mg alloy in NaCl media. Corros. Sci,2002,44:1163 CSCD被引 5    
3.  Ocenasek V. Resistance to recrystallization due to Sc and Zr addition to Al-Mg alloys. Mater.Charact.,2001,47:157 CSCD被引 39    
4.  Zhang Y. H. Rare Met. Mater. Eng,2002,31(3):167 CSCD被引 2    
5.  Filatov Y A. A. New Al-Mg-Sc alloys, Mater, Sci. Eng. A,2000,280:97 CSCD被引 68    
6.  Xiao Y. D. Chin. J. Rare. Met(in Chinese),1999,23(2):113 CSCD被引 1    
7.  Xiao Y D. D. Chin. J. Rare Met(in Chinese),1999,23(5):331 CSCD被引 1    
8.  Ahmad Z. A. Corros. Soi,2001,43:1227 CSCD被引 1    
9.  Tao B. W. J. Rare Earths,2005,2:267 CSCD被引 1    
引证文献 5

1 李杨 微量Sc、Ti对商业纯Al拉伸性能的影响 热加工工艺,2009,38(20):11-14
CSCD被引 0 次

2 李卫华 Zr含量对Al-0.2wt%Sc合金晶粒尺寸分布和室温拉伸性能的影响 热加工工艺,2009,38(22):25-28
CSCD被引 4

显示所有5篇文献

论文科学数据集
PlumX Metrics
相关文献

 作者相关
 关键词相关
 参考文献相关

版权所有 ©2008 中国科学院文献情报中心 制作维护:中国科学院文献情报中心
地址:北京中关村北四环西路33号 邮政编码:100190 联系电话:(010)82627496 E-mail:cscd@mail.las.ac.cn 京ICP备05002861号-4 | 京公网安备11010802043238号