钛合金TC4材料热处理工艺对圆筒在内爆炸载荷下膨胀半径的影响
Influence of cylinder expansible radius under internal explosive loading by heat-treated technology of Ti-6Al-4V alloy
查看参考文献15篇
|
文摘
|
对采用两种不同热处理工艺的钛合金TC4材料进行了Hopkinson拉伸实验、圆筒爆炸实验和数值仿真,从而确定了两种不同热处理工艺的优劣并通过微观分析揭示了钛合金TC4材料微观组织结构对内爆炸载荷下圆筒膨胀半径的影响.实验和数值分析表明:采用双重退火热处理工艺的钛合金TC4材料具有良好的动态力学性能.在相同的加载条件下,经此工艺处理的TC4圆筒在爆轰产物未泄漏之前有着充分的膨胀半径,而且也不容易形成绝热剪切破坏.同时,给出的依据高速摄影照片确定筒壳断裂点的方法是切实可行的,获得的断裂时间与数值分析结果吻合. |
|
其他语种文摘
|
After two kinds of different heat-treated technologies are applied to Ti-6A1-4V alloy, the Hopkinson tension experiment, cylinder explosive test and numerical simulation are conducted in this paper. Consequently, the differences between two hot-workings are determined and the influence of microstructure of Ti-6A1-4V alloy on the expansive radius of cylinder under internal explosive loading is revealed by microscopic analysis. The experiment and numerical calculation show that excellent mechanical properties of Ti-6A1-4V alloy have been acquired by double annealing heat treatment technology. Under identical loading conditions, the double annealing hot-working gives the cylinder abundant expanding radius before leaking out of detonation products and the damage of adiabatic shear can not be formed so easily. Meanwhile, the method of determining rupture point of the cylindrical shell is practicable by high speed scanning records and the obtained fracture time is consistent with the numerical calculation results. |
|
来源
|
爆炸与冲击
,2004,24(4):337-346 【核心库】
|
|
关键词
|
固体力学
;
热处理
;
Hopkinson拉伸实验
;
钛合金TC4
;
膨胀半径
;
圆筒爆炸实验
;
数值仿真
;
微观分析
|
|
地址
|
1.
中国科学院力学研究所, 非线性力学国家重点实验室, 北京, 100080
2.
中国兵器工业集团52研究所烟台分所, 山东, 烟台, 264003
|
|
语种
|
中文 |
|
文献类型
|
研究性论文 |
|
ISSN
|
1001-1455 |
|
学科
|
力学 |
|
文献收藏号
|
CSCD:1659958
|
参考文献 共
15
共1页
|
|
1.
Gurney R W. The Initial Velocity of Fragments from Bombs.
The Initial Velocity of Fragments from Bombs,1943:405
|
CSCD被引
1
次
|
|
|
|
|
2.
孙承纬. 应用爆轰物理[M].
应用爆轰物理,2000:574-580
|
CSCD被引
3
次
|
|
|
|
|
3.
Taylor G I. The fragmentation of tubular bombs[A].
The Science Papers of Sir G.I.Taylor Vol.Ⅲ,1963:387-390
|
CSCD被引
1
次
|
|
|
|
|
4.
张守中. 爆炸与冲击动力学[M].
爆炸与冲击动力学,1993:369-375
|
CSCD被引
3
次
|
|
|
|
|
5.
Slate P M B. The rupture behaviour of metals at high strain[J].
Journal of the Institute of Metals,1967,95(2418):244-251
|
CSCD被引
3
次
|
|
|
|
|
6.
Hoggatt C R. Fracture behavior of tubular bombs[J].
Journal of Applied Physics,1968,39(3):1856-1862
|
CSCD被引
50
次
|
|
|
|
|
7.
Ivanov A G. Explosive deformation and destruction of tubes[J].
Strength of Materials,1976,8(11):1303-1311
|
CSCD被引
5
次
|
|
|
|
|
8.
Wesenberg D L. Dynamic fracture of 6061-T6 aluminum cylinders[J].
Journal of Applied Mechanics,1977,44:643-646
|
CSCD被引
9
次
|
|
|
|
|
9.
胡八一. 爆炸金属管绝热剪切断裂的细观研究.
爆炸与冲击,1993,13(4):305-312
|
CSCD被引
13
次
|
|
|
|
|
10.
Martineau R L. Expansion of cylindrical shells subjected to internal explosive detonations[J].
Experimental Mechanics,2000,40(2):219-225
|
CSCD被引
22
次
|
|
|
|
|
11.
范亚夫. Johnson-Cook材料模型参数的实验测定.
力学与实践,2003,25(5):40-43
|
CSCD被引
39
次
|
|
|
|
|
12.
范亚夫. 爆炸载荷下具有附加质量筒壳结构与相关材料动力学响应研究[D].
爆炸载荷下具有附加质量筒壳结构与相关材料动力学响应研究,2003
|
CSCD被引
1
次
|
|
|
|
|
13.
王德生. 不同照明条件下分幅摄影效果的实验研究[J].
爆轰波与冲击波,2000(1):16-20
|
CSCD被引
1
次
|
|
|
|
|
14.
yon Neumann J. A method for the numerical calculation of hydrodynamical shocks[J].
Journal of Applied Physics,1950,21:232
|
CSCD被引
1
次
|
|
|
|
|
15.
Haupt P. Continuum Mechanics and Theory of Materials[M].
Continuum Mechanics and Theory of Materials,2000:109-117
|
CSCD被引
1
次
|
|
|
|
|
了解气象卫星更多信息，请访问